PharmaPicker case, complete
Versatile sampling kit with volumetric tips, extension rods, and a carrying case
- Material-efficient sampling of very small quantities
- Precise, targeted sampling at defined points
- Interchangeable volumetric tips allow for adaptation to different analytical requirements
- Comprehensive equipment for versatile sampling requirements
- Carrying case for practical storage and safe transport
Please note
Other sample volumes are available upon request.
Detailed information
This practical sampling kit combines various components of the PharmaPicker system in a sturdy carrying case. With two collection vials and ten interchangeable volumetric tips for sample volumes ranging from 0.4 to 2.5 ml, the sample volume can be precisely adjusted to meet different analytical requirements. The included extension rods, measuring 50 and 100 cm in length, allow for flexible adjustment of the reach to accommodate various container sizes and sampling depths. Thanks to its modular design, the individual components can be combined according to the specific sampling task. The carrying case ensures organized storage of the components and facilitates transport between different locations.
The PharmaPicker allows for the targeted and controlled collection of small powder samples. Designed for highly potent, expensive, or active substances, this sampler promotes efficient use of materials in the pharmaceutical industry. Interchangeable volume tips allow the user to adjust the sample volume to meet various analytical requirements. The self-closing sliding sleeve enables precise, targeted sampling from defined depths. The collection chamber remains closed during insertion and opens only when gently pulled back at the desired sampling point. This reduces unwanted mixing with material from other layers and enables targeted quality testing. After sampling, the collection chamber can be removed, allowing the sample to be transferred directly into an analysis vessel. The PharmaPicker is made of high-quality 1.4404 (316L) stainless steel, making it suitable for demanding laboratory and production environments. With a penetration depth of 570 mm, deeper areas of powder bulk can be reached. For larger containers, the reach can be extended from 50 or 100 cm to 3.5 m using optional extension rods. Thus, the PharmaPicker offers a flexible solution for sampling free-flowing, powdered, and fine-grained materials.
Typical application area of the product
The PharmaPicker is ideal for sampling in pharmaceutical production, quality control, and laboratory analysis. It allows for the precise extraction of small amounts of active pharmaceutical ingredients (APIs), blends of active ingredients, and finely ground raw materials. When examining bulk powder materials, samples can be taken from specific depths to verify the quality of the material at particular locations.
How to use the product
- Insert the desired volumetric tip into the collection bomb.
- Insert the PharmaPicker; the sliding sleeve automatically seals the collection bomb.
- At the target point, gently pull back the PharmaPicker; the sliding sleeve opens the collection bomb, and the desired sample is collected.
- Pull the PharmaPicker all the way back.
- Remove the collection bomb and empty the sample directly from the collection bomb into the analysis vessel.
Material
- Collection tube 0.1–1.2 mL
- Collection vial 1.25–2.5 mL
- Extension rod 50 cm
- Extension rod 100 cm
- Handle
- Volume tips: 0.4 ml, 0.6 ml, 0.8 ml, 1.0 ml, 1.2 ml, 1.4 ml, 1.8 ml, 2.0 ml, 2.3 ml, and 2.5 ml
- Carrying case
Specifications
General material
1.4404 (316L)
Stainless steel 1.4404, AISI 316L
Collector dimensions
- Plunge depth:
- 570 mm (22.4409 in)
- Total length:
- 606 mm (23.8583 in)
Lance for collection volume
- For collection volumes of:
- 0.1 ml (0.0034 fl oz)
- For collection volumes up to:
- 2.5 ml (0.0845 fl oz)
Sampling lances
- Sampling type:
- Target point sample
- Grain size samples:
- powdery/fine-grained
- Sample material:
- free-flowing
- Special properties Sample lances:
- Removable tip
- Top:
- pointed
Complementary products
PharmaPicker Extension
Collector Chamber for PharmaPicker Volume Tips
The collection bomb is the sample collection cylinder of the PharmaPicker system. The respective volume tip is inserted into this stainless steel chamber from the front. The collection cylinder is available in two sizes, each matching the volume range of the tips. Thanks to its removable design, the collected sample can be transferred directly into an analysis vessel. This simplifies handling, reduces the need for additional transfer steps, and minimizes potential material loss.
Quali-Paper for zone collectors
Sampling bag SteriBag
The bags are made of polyethylene and are therefore exceptionally tearproof and leakproof.
The SteriBag sampling bag is distinguished by its safe handling. When used according to instructions, samples are guaranteed sterile.
Integrated safety: The tab-ends are sealed in plastic film to prevent skin injuries.
Similar products
PharmaPicker for samples from 0.1 to 1.2 ml
PharmaPicker for samples of 1.25–2.5 ml
MicroSampler powder sampler for samples 0.2 - 1.0 ml
The MicroSampler has especially been designed for the sampling of small quantities of powder.
Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.
The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.
MicroSampler powder sampler for samples 2.0 - 10 ml
The MicroSampler has especially been designed for the sampling of small quantities of powder.
Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.
The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.
StickProof
Sampler for powder in the pharma area, made of stainless steel AISI 316L, material 1.4404. The especially slender tip can be inserted easily and deeply in order to take the sample. The conical inlet of the tip allows the collection of either very small or larger quantities. StickProof is constructed in one piece without edges, grooves or crevices for perfect and easy cleaning. The sample can be filled directly into the sampling bag from the outlet end. Fasten the bag with a sturdy clamp.
Disposable powder sampler PharmaDispo
Disposable powder sampler PharmaDispo, sterile
Mini ViscoSampler
Sampler for viscous substances such as pastes, mud, creams, oils. The sample is drawn in using the pump rod and directly conveyed to a sampling container. Easy cleaning for flawless sampling.
Novartos Multi pharmaceutical zone sampler 2-compartment sampler
Novartos Multi pharmaceutical zone sampler 3-compartment sampler
PharmaSpoon
PharmaSpoon for taking samples of powdery substances, intermediate products and material in the pharmaceutical industry. Special materials with excellent surface qualities must be used for this to prevent cross-contamination. Our PharmaSpoon fulfils these requirements. Made of stainless steel AISI 316L (1.4404), surface highly polished by hand (not electro-polished!). The excellent surface properties of the PharmaSpoon provide significant advantages.
