Novartos Multi pharmaceutical zone sampler 3-compartment sampler
Powder sampler per FDA Unit Dose Sampling guideline
- For collecting representative retained samples
- Accurately fitting, easily interchangeable sample inserts
- Various volumes available
- Three individual samples each from several sampling points in one sample withdrawal
- Triple multi-point sample with easily replaceable sample inserts
Please note
Please order the desired inserts as accessories!
Detailed information
With the Novartos Multi 3-fold sampler, a triple multipoint sample is taken from several predefined sampling zones. Depending on the length, four, seven or nine collection chambers are fitted with three sample inserts (accessories) each for the triple sampler.
Novartos pharmaceutical samplers can be used to collect multiple unit-dose samples from one or more sampling points in a single sample run.
Thanks to the intelligent design of these pharmaceutical samplers, it is not necessary to pierce the sample material multiple times for a multiple sample, thus largely eliminating segregation of the sample material. This is a particularly important requirement when sampling very small quantities in the pharmaceutical industry.
With the Novartos sampler, a large number of samples can be taken quickly and easily, even from the same location, allowing representative retained samples to be taken.
The immersion depth of the sample lance is easy to read thanks to a laser-engraved depth scale. The rounded tip prevents scratching of the container. Two additional handles ensure safe insertion, fixation and rotation in the material. Tight-fitting inserts prevent material mixing and allow easy disassembly for thorough cleaning.
The electro-polished, grooveless surface of the pharmaceutical samplers and the high quality workmanship ensure that there are no crevices in which sample residue can accumulate, which also makes for easy cleaning.
Typical application area of the product
The Novartos pharma sampler is a highly specialized sampler that is mainly used in the pharmaceutical industry to meet the strict requirements of the FDA guidelines for unit dose sampling. However, the application is not limited to the pharmaceutical sector, but can also be used in the chemical industry, the food and beverage industry, biotechnology, wherever small quantities of powders need to be sampled in a representative way.
How to use the product
- Set the sampler to the "CLOSE" position at "1". The sampler is closed and can be inserted into the powder/granulate.
- Insert the sampler into the powder/granulate to the desired depth (the scale indicates the depth in cm).
- Move the sampler to the "OPEN" position at "1". The sampler is now open and is filled with sample.
- Move the sampler at "1" to the "CLOSE" position. The sampler is closed and the powder/granulate can be removed.
- If a second sample is to be taken, move the sampler to the "CLOSE" position at "2".
- Move the sampler at "2" to the "OPEN" position. The sampler is open and is filled with the second sample.
- Move the sampler at "2" to the "CLOSE" position. The sampler is closed and the powder/granulate can be removed.
- If a third sample is to be taken, move the sampler to the "CLOSE" position at "3".
- Move the sampler at "3" to the "OPEN" position. The sampler is open and is filled with the third sample.
- Move the sampler at "3" to the "CLOSE" position. The sampler is closed and the powder/granulate can be removed.
- Open the sampler and empty the sample onto an appropriately prepared surface or into a suitable collecting container.
- Sampling lance Novartos Multi 3-compartment sampler
Specifications
General material
1.4404 (316L)
Stainless steel 1.4404, AISI 316L
General material
1.4571
Stainless steel 1.4571, AISI 316Ti
Sample chamber details
- Number of collection openings:
- 4
- Maximum coverage:
- 12
Lance dimensions
- Pipe Ø:
- 25 mm (0.9843 in)
- Plunge depth:
- 600 mm (23.622 in)
- Total length:
- 800 mm (31.4961 in)
Collecting chamber dimensions
- Chamber length:
- 30 mm (1.1811 in)
- Start of the collecting chamber:
- 55 mm (2.1654 in)
- Chamber width:
- 13 mm (0.5118 in)
- Distance between the chambers:
- 125 mm (4.9213 in)
Sampling lances
- Sampling type:
- Multi point sampling
- Grain size samples:
- powdery/fine-grained
- Sample material:
- free-flowing
- Special properties Sample lances:
- Removable tip,round tip
- Top:
- rounded
You need
The Novartos Multi sampler offers a wide range of sample volumes; different inserts with sample volumes from 0 to 2.0 ml can be selected and combined.
Blind inserts (0.0 ml) can be used to prevent a sample from being taken at a specific point.
Complementary products
Novartos tip (not rounded)
Quali-Paper for zone collectors
Similar products
Novartos Multi pharmaceutical zone sampler 2-compartment sampler
Novartos Uno pharmaceutical zone sampler 3-compartment sampler
Novartos Uno pharmaceutical zone sampler 2-compartment sampler
Powder Sampler Mini
MicroSampler powder sampler for samples 0.2 - 1.0 ml
The MicroSampler has especially been designed for the sampling of small quantities of powder.
Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.
The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.
MicroSampler powder sampler for samples 2.0 - 10 ml
The MicroSampler has especially been designed for the sampling of small quantities of powder.
Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or containers.
The tips of the MicroSampler are interchangeable. This means that tips with different volumes can be used.