Spigot "Air"
- Self-venting
- NW 13 mm
- Seal made of natural rubber
Detailed information
No additional ventilation opening required, PE, transparent, 3/4" thread connection outside.
- Spigot "Air"
Specifications
General material
PE
Polyethylene
Further materials
VMQ, MVQ, SI
Silicone
Connection
- Connection type:
- Thread
- Thread:
- G 3/4 Zoll
- Version:
- External thread
Coloring
- Color:
- colorless
Spigot outlet
- Outer outlet Ø:
- 22 mm (0.8661 in)
- Outlet type:
- Outlet
Nominal Ø
- Nominal diameter:
- 13 mm (0.5118 in)
Dimensions
- Length:
- 86 mm (3.3858 in)
- Width:
- 67 mm (2.6378 in)
- Height:
- 112 mm (4.4094 in)
Type of spigot
- Design of the stopcock:
- Cylinder tap
- Flow rate:
- low flow rate
- Special features:
- self-venting
Similar products
Stainless steel spigot
Very sturdy and robust spigot made of stainless steel AISI 304 (1.4301). The outlet of the spigot turns 360° so it can be adjusted to any required position. With a practical suspension device for filling container and eyelet for shutting off the spigot.
Spigot "Brass"
Barrel tap for petrochemical liquids, closed independently when not used (increased safety), thread connection 3/4" on the outside.
StopCock PA, electroconductive
Commercially available spigots made of the materials polyethylene or polypropylene cannot be used for solvents.
StopCock PA fits onto 3/4" outer threads and with the supplied adapter onto 3/4" inner threads and therefore onto nearly all commercially available canisters and barrels where the discharge thread is at the bottom.
The StopCock discharge cocks fit all containers with G 3/4" connection threads. Thread adapters facilitate connection of cocks to nearly all containers.