View in the interactive catalog
To all specifications

Packaging unit

Piece

Where to buy

Please note

Please note that OTAL® hand pumps made of PP or PVDF should be used for corrosive, caustic media.

Detailed information

The OTAL® foot pump with delivery tubes made of high-quality stainless steel 1.4301 (304) is ideal for bottling liquids of hazard class AIII (VbF) that are difficult to ignite. The stainless steel delivery tubes guarantee high chemical resistance as well as high temperature resistance.

Compared to models made of plastic, stainless steel delivery tubes are particularly robust, dimensionally stable, resilient and extremely durable.

OTAL® hand and foot pumps are compact universal pumps for filling and transferring from containers and drums. Established in the market for more than 70 years, the pumps are known for their easy handling in daily use.

The drum and container pumps operate on the air-over-pressure principle. Only the delivery tubes come into contact with the liquid, which ensures a wide range of chemical resistance. Depending on the model, the tubes are made of PE, PP, PVDF or stainless steel. In this way, a wide variety of liquids can be filled quickly and easily.

To ensure proper operation, the pumps must be mounted in an airtight container. Repeated actuation of the pump ball creates an overpressure in the container, which drives the liquid out of the container through the delivery tube. The liquid flow is pulsation-free and steady and can be stopped immediately by the air release valve without any after-running.

OTAL® hand and foot pumps are extremely robust, durable and of outstanding quality. They can be used to transfer and fill acids, alkalis and aqueous solutions from larger containers to smaller ones easily and cost-effectively.

The universal plug allows the pump to be used with all common containers without the need for a threaded connection.

The telescopic dip tube is height adjustable and can be shortened if necessary. This ensures optimum residual discharge so that filling can be carried out from 220 liter drums as well as from smaller canisters.

OTAL® hand and foot pumps are a practical and reliable solution for filling and transferring liquids. Their high quality, universal applicability and ease of use make them the perfect choice for everyday use.

Thanks to their compact design and universal applicability, the pumps are a practical solution for draining and transferring small quantities of water, oils, acids, alkalis, and other liquids with a maximum viscosity of approx. 500 mPas.

Typical application area of the product

The OTAL® foot-operated pump with stainless steel delivery tubes is the ideal solution for customers in the chemical and pharmaceutical industries, as well as laboratories, who need a safe and efficient method of filling flame-retardant liquids.
How to use the product
  1. If necessary, adjust the universal plug to fit the opening diameter of the container.
  2. Fully extend the telescopic tube.
  3. Insert the telescopic tube and universal plug into the container and push them together to form a seal.
  4. Close the stop valve.
  5. Position the discharge elbow over the filling container.
  6. Actuate the pump ball and build up pressure. Liquid will now flow.
  7. To stop filling, open the stop valve and release the excess pressure.
5000-5018_otal_fusspumpe_edelstahl_gebrauchsanleitung.pdf 5000-5018_otal_fusspumpe_edelstahl_gebrauchsanleitung.pdf
  • OTAL® Foot Pump Stainless Steel

Specifications

General material

1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304

Further materials

PVC
Polyvinyl chloride

Connection

For openings from:
30 mm (1.1811 in)
For openings up to:
70 mm (2.7559 in)

Throughput

Conveying capacity:
26 l/min (6.8685 GPM)

Ø

Pipe Ø:
18 mm (0.7087 in)
Immersion tube Ø:
22 mm (0.8661 in)

Pump outlet

Outer outlet Ø:
18 mm (0.7087 in)
Length of discharge tube:
250 mm (9.8425 in)
Outlet type:
Discharge tube

Delivery tube

Immersion depth max.:
90 cm (35.4331 in)
Immersion depth from:
40 cm (15.748 in)
Immersion depth up to:
90 cm (35.4331 in)

foot-operated pump

Air hose length:
1.5 m (4.9213 ft)

Limit values

Viscosity up to:
500

Coloring

Color:
red/yellow

Filling container

For containers up to:
approx. 220 liters

How to fill

Drive type:
foot-operated
To the list of chemical resistance

OTAL® foot pumps are available with pipes made of PE, PP, PVDF or stainless steel.

Similar products

OTAL® stainless steel hand pump OTAL® stainless steel hand pump

OTAL® stainless steel hand pump

The OTAL® hand pump with delivery tubes made of high-quality stainless steel 1.4301 (304) is ideal for filling difficult to ignite liquids of hazard class AIII (VbF). The stainless steel delivery tubes guarantee high chemical resistance as well as high temperature resistance.
OTAL® disposable foot pump OTAL® disposable foot pump

OTAL® disposable foot pump

OTAL® foot pump with disposable delivery tubes made of PE for single use. With OTAL® pumps, the medium to be filled only comes into contact with the delivery tube. The disposable delivery tube can be replaced quickly and easily after use.
OTAL® foot pump PVDF OTAL® foot pump PVDF

OTAL® foot pump PVDF

The OTAL® foot pump with PVDF delivery tubes is reliable and highly resistant to chemicals, including chlorine bleach. The transfer pump is easy to use and cost effective, ideal for fast filling.
OTAL® foot pump PP OTAL® foot pump PP

OTAL® foot pump PP

The OTAL® foot pump with PP delivery tubes is reliable, flexible and cost-effective. Various tubes with different diameters/flow rates are available. PP tubes are resistant to many acids, alkalis and cleaning agents.
OTAL® foot pump with hose & stopcock OTAL® foot pump with hose & stopcock

OTAL® foot pump with hose & stopcock

The OTAL® foot pump with hose and stopcock is flexible and space-saving. The 1.5 m (4.92 ft.) long adaptable PVC hose allows flexible positioning of the filling container. The stopcock made of PP/PE enables precise dosing and prevents overflow.
OTAL® battery pump foot operation OTAL® battery pump foot operation

OTAL® battery pump foot operation

The OTAL® battery pump is a flexible pump with hose, stopcock and dispensing nozzle. No need to place the container underneath - just run the 1.5 m (4.92 ft.) hose to the container. Adjustable discharge hose. Ideal for filling automotive batteries with acid.
OTAL® hand pump PVDF OTAL® hand pump PVDF

OTAL® hand pump PVDF

The OTAL® hand pump with PVDF delivery tubes is reliable and has very good chemical resistance, including chlorine bleach. The transfer pump is easy to use and cost effective, ideal for fast filling.
OTAL® hand pump PP OTAL® hand pump PP

OTAL® hand pump PP

The OTAL® hand pump with PP delivery tubes is reliable, flexible and cost-effective. Various tubes with different diameters/conveying capacities are available. PP tubes are resistant to many acids, alkalis and cleaning agents.
OTAL® Hand pump with hose & stopcock OTAL® Hand pump with hose & stopcock

OTAL® Hand pump with hose & stopcock

The OTAL® hand pump with hose and stopcock is flexible and space-saving. The 1.5 m (4.92 ft.) long adaptable PVC hose allows flexible positioning of the filling container. The stopcock made of PP/PE enables precise dosing and prevents overflow.
OTAL® mini hand pump PP OTAL® mini hand pump PP

OTAL® mini hand pump PP

The OTAL® mini hand pump PP is ideal for smaller containers. With a smaller plug (20-36 mm (0.79-1.42 in.)) and an immersion depth of 45 cm (17.72 in.), it is ideal for containers up to 10 liters (2.64 gal.). Resistant to weak acids and alkalis. Economical alternative for reliable filling.
OTAL® disposable hand pump OTAL® disposable hand pump

OTAL® disposable hand pump

OTAL® hand pump with disposable PE delivery tubes for single use. With OTAL® pumps, the medium to be filled only comes into contact with the delivery tube. The disposable delivery tube can be replaced quickly and easily after use.
OTAL® battery pump manual operation OTAL® battery pump manual operation

OTAL® battery pump manual operation

The OTAL® battery pump is a flexible pump with hose, stopcock and dispensing nozzle. No need to place the container underneath - just run the 1.5 m (4.92 ft.) hose to the container. Adjustable discharge hose. Ideal for filling automotive batteries with acid.