MiniSampler PE
Sampling - convenient, quick, clean, practical
- Also suitable for viscous oils
- Complete in a handy transport case
Detailed information
PE MiniSampler for general sampling, max. suction height 5 m*
Ideal for general sampling from barrels, canisters, tanks etc.
With the vacuum sampler MiniSampler, the sample liquid only comes into contact with the suction hose and the original sample bottle. The possibility of cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed. The disposable suction hose can quickly be replaced. This guarantees that the samples are never contaminated. If necessary, a new hose can be used for every single sample.
Due to its small diameter (8 mm (0.31 in.)), the hose can reach narrow, seemingly inaccessible sampling areas.
Typical application area of the product
The MiniSampler sampling pump is ideal for sampling from deep or narrow sampling points.
How to use the product
- Insert the hose and the bottle into the pump.
- Insert hose end to desired sample depth.
- Move the pump piston back and forth and collect the sample. The liquid flows directly into the bottle.
- Take off the filled bottle, close and label it.
- Transport case
- Vacuum pump
- 10x PE 100 ml bottles
- 10 m PE suction hose 6 x 8 mm
- Hose cutter
- Stainless steel hose weight made of V2A (1.4301), nickel-plated brass
- 20x seal-it label seals
Specifications
General material
PE
Polyethylene
General material
1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304
Further materials
PP
Polypropylene
Thread
- Thread:
- GL 32
- Version:
- Internal thread
Tubing length
- Hose length:
- 10 m
Contents of collection container
- Contents:
- 100 ml
Limit values
- Viscosity up to:
- 500
- Intake height:
- 5
Dimensions
- Length:
- 402 mm (15.83 in)
- Width:
- 335 mm (13.19 in)
- Height:
- 97 mm (3.82 in)
Vacuum sampler
- Sampling type:
- Target point sample
- Sample material:
- liquid,viscous/light viscosity
- Special features Vacuum sampler:
- Completely transportable in a case
Complementary products
Narrow neck reagent bottles
Narrow neck reagent bottles
Hose cutter
Edges cut with the hose cutter are always clean and flat, even in the case of thick hoses. For hoses to Ø 20 mm (0.79 in.).
MiniSampler adapter PTFE
MiniSampler pump with adapter PP
The hand pump creates a vacuum by pulling, allowing liquids to be drawn from depths of up to 5 m. The PP adapter (GL 32 internal thread) makes it possible to connect a sample bottle directly to the pump – so the collected sample is transferred immediately into the container. With the MiniSampler vacuum sampler, the sample liquid only comes into contact with the suction hose and the original sample bottle, greatly reducing the risk of cross-contamination.
Also available as a set with accessories (bottles, hose, hose weight, hose cutter, sealing labels, transport case).
MiniSampler standard pump
The hand pump creates a vacuum by pulling, allowing liquids to be drawn from depths of up to 5 m. A sample bottle can be connected to the pump using an adapter (not included), so the collected sample is transferred directly into the container. With the MiniSampler vacuum sampler, the sample liquid only comes into contact with the suction hose and the original sample bottle, greatly reducing the risk of cross-contamination.
Also available as a set with accessories (adapter, bottles, hose, hose weight, hose cutter, sealing labels, transport case).
Similar products
MiniSampler PTFE
PTFE MiniSampler for ultra-pure sampling, max. suction height 5 m (16.40 ft.).
Ideal when maximum purity is needed.
UniSampler sampler with lance
UniSampler with hose
UniSampler with PVC hose and hose weight made of stainless steel. For deep, hard-to-reach places. The mass of the metal tube drags the hose to any depth.
ProfiSampler Aluminium
ProfiSampler aluminum for solvents and flammable liquids in Explosion Categories IIA, IIB and IIC. With bottle thread GL 45 (suitable for Schott glass bottles 100 ml (3.38 oz.) to 1000 ml (33.81 oz.)).
When taking samples of flammable liquids, the device must be grounded. For this, grounding cable and, possibly in addition, anti-static set should be used, see accessories.
Profi Sampler PP
ProfiSampler PP for general samples, for weak acids, alkalis, detergents, chemical baths. Made of solid, chemical resistant Polypopylene.
Sampler for liquid samples UniSampler "Ex"
The sampler was specially developed for sampling flammable liquids of hazard class AI (VbF, e.g. petrol). The glass bottle and hose are electrically connected and earthed via an earth cable.