Mounting graduation for wide-necked jerrycans
The scale is self-adhesive and can be attached anywhere on the jerrycan. However, it is recommended to attach the scale to the side of the outlet spout.
1. Degrease the target surface
Degrease the surface of the jerrycan at the point where you want to apply the litre scale.
2. Mark at a height of 3 cm
Place an alignment mark at a height of 3 cm, measured from the bottom of the container.
3. Cut off the excess part
Cut off the excess area below the adjustment line.
4. Remove the protective foil
Peel off the protective foil on the back of the litre scale.
5. Stick on the litre scale
Stick the dotted adjustment line congruently onto your marking at a height of 3 cm.
6. Press on the litre scale
Press the litre scale firmly.
Litre scale for wide neck canisters
Graduation for wide-necked jerrycans
The graduation is designed for quick and easy volume estimation in wide-necked jerrycans without an integrated scale. It is applied to the outside of the jerrycan and shows the amount of liquid filled in liters – ideal for applications where precise level control is required. Made from durable, chemical-resistant material, the graduation adheres reliably to PE and PP surfaces. Application is simple: just stick it onto the clean outer wall of the jerrycan.
Available for different jerrycan sizes.
Wide neck canister
