Compact space-saving set
Room economy canister with compact drain tap
- Space saving and optimum use of space
- High-quality canister and outlet tap in one
- Precise and clean dispensing of the liquid
Please note
Container autoclavable without lid and accessories.
Detailed information
The Compact space-saving set consists of the space-saving canister with threaded spout 5 l (1.32 gal.) (0435-2050) or 10 l (2.64 gal.) (0435-2100) and the Compact drain tap (0530-1000).
The Compact drain tap is the ideal addition to the space-saving canister - for perfect storage and filling in the tightest of spaces! The Compact space-saving set, consisting of the space-saving canister with 3/4" threaded connection and the Compact drain tap, enables space-saving storage as well as convenient handling of the liquid through direct filling or clarification.
The space-saving set is a filling or settling canister for practical storage and filling even in confined spaces.
Typical application area of the product
In laboratories, where space is often limited, the space-saving canister enables chemicals to be stored safely. In production environments, liquids can be stored efficiently and filled precisely when required.
The canister's food-safe materials make it ideal for storing food additives, flavorings and other liquid ingredients.
In environmental technology, the canister can be used for collecting, storing and transporting water samples or hazardous liquids.
- Space saving canister with threaded connection and Compact drain spigot
Specifications
General material
PP
Polypropylene
General material
PE-HD
High-density polyethylene (HDPE)
General material
PE-LD
Low-density polyethylene (LDPE)
General material
PTFE
Polytetrafluoroethylene
Closure
- Closure type:
- Screw cap with tamper-evident closure
Volume
- Contents:
- 5 l (1.3209 gal)
Body dimensions
- Height with fastener:
- 335 mm (13.189 in)
- Length:
- 369 mm (14.5276 in)
- Width:
- 65 mm (2.5591 in)
Scaling
- Division:
- 0.25 l (0.066 gal)
- Scale:
- transparent embossed
Thread
- Thread:
- S 50x4 (DIN50)
- Version:
- External thread
Coloring
- Color:
- colorless
Dimensions neck/thread
- Thread Ø:
- 50 mm (1.9685 in)
- Inside neck Ø:
- 41 mm (1.6142 in)
Canister properties
- Holder for outlet tap:
- Spigot with 3/4 inch external thread
Canister
- Special properties canister:
- space-saving,suitable as a clarification/sedimentation tank
The space-saving canister is also available in an unthreaded version or as a kit with the StopCock drain stopcock.
Similar products
Compact canister & StopCock set
Space saving canister with 3/4" threaded connection
Space-saving canister
Compact canister set, electroconductive
Space-saving canister with 3/4" threaded connection, electrically conductive
Wide-necked canister with 3/4" threaded connection
Compact spigot
The spigot Compact for canisters and barrels captivates everyone through its compact build, which makes the valve on the canister ideal for use in refrigerators and on racks, etc. The short discharge does not protrude out over the lower edge of the container, which makes the valve a perfect choice even when space is very limited.
The discharge's specially optimised design creates an even stream of liquid with no splashing or spattering.
The spigot features easy motion and a tight seal. It is screwed on with a connecting cap nut. This guarantees a vertical position of the valve and makes it possible to adjust the valve later on.
PP, PE and PTFE are materials that offer outstanding chemical resistance to acids and alkalis.
StopCock angled
The rotatable spout angle prevents dripping. The reduced spout allows the water to flow into narrow openings.
StopCock straight-through
The StopCock discharge cocks fit all containers with G 3/4" connection threads. Thread adapters facilitate connection of cocks to nearly all containers.
